Oki ML63611, User Manual

Page: 79 / 271

ML63611 User’s Manual
Chapter 7 Timers (TIMER)
7 – 4
OPTION B (D): 1.5 V (3.0 V), With regulator
circuit for LCD bias
OPTION A (C): 1.5 V (3.0 V), Without regulator
circuit for LCD bias
Timer 2 Registers
Timer 3 Registers
(2) Timer counter registers
(TM0CL, TM0CH, TM1CL, TM1CH, TM2CL, TM2CH, TM3CL, TM3CH)
•
8-bit binary counter operation
•
At system reset, all valid bits are cleared to “0”.
•
Note regarding register values:
When a value is written to any timer counter register, the same value is also written to the corresponding
timer data register.
However, when writing to a timer data register, the same value is not written to the corresponding timer
counter register.
Timer 0 Registers
T2D3 T2D2 T2D1 T2D0
(076H)
(R/W)
TM2DL
(Timer 2 lower)
bit 3 bit 2 bit 1 bit 0
T2D7 T2D6 T2D5
T2D4
(077H)
(R/W)
TM2DH
(Timer 2 upper)
bit 3 bit 2 bit 1 bit 0
T3D3 T3D2 T3D1
T3D0
(078H)
(R/W)
TM3DL
(Timer 3 lower)
bit 3 bit 2 bit 1 bit 0
T3D7 T3D6 T3D5
T3D4
(079H)
(R/W)
TM3DH
(Timer 3 upper)
bit 3 bit 2 bit 1 bit 0
T0C3 T0C2 T0C1
T0C0
(06CH)
(R/W)
TM0CL
(Timer 0 lower)
bit 3 bit 2 bit 1 bit 0
T0C7 T0C6 T0C5
T0C4
(06DH)
(R/W)
TM0CH
(Timer 0 upper)
bit 3 bit 2 bit 1 bit 0