Nitto DURA SI600, Instruction Manual

Page: 88 / 175

SETUP PROCEDURE
3-40
3.3.21 Label and Ribbon Combination
Set the combination number of the label and the ribbon.
To obtain the best printing quality, please select a setting from the List of combinations.
1
Display the “PAIR of LABEL &
RIBBON” menu under “LABEL
SET” (Edit) mode.
The current preset value will be displayed
in the fourth line on the LCD.
2
Press the key.
When you change the row during setting the
label and ribbon combination, the selected
row will be highlighted.
3
When you turn the dial the relevant
number will be shown.
Range for Setting : 0 ~ 99
The Combination Number
of Label and Ribbon
Label Ribbon
0 General combination
1 P251H H
2 P251H H20
3 PT50NS H
4 PT50NS H20
5 10PN 10PN
6 ～ 99 General combination
* If the printing speed is over 75mm/s, it always uses the general combination for the
printing.
4
Press the key.
Determine the label and ribbon combination, then return to the selection operation of the setting
menu.
Pressthe key
and return to selection
of a setting menu.