Nitto DURA SI600, Instruction Manual

Page: 105 / 175

SETUP PROCEDURE
3-57
3.4.19 Setting of Coordinates Adjustment
Set the method of adjusting printing position (coordinates) when there is difference between the
drawing range of computer and the actually available printing range.
1
Under advanced mode, turn the
dial to display “COORDINATES
ADJUST”.
The current setting will be displayed in the
third line on the LCD.
2
Press the key.
Move to the operation of setting adjustment
options and the option line will be displayed
in reverse video.
3
Turn the dial to display a
random option for adjustment.
Setting Content
NORMAL No adjustment of printing position.
+ADJUSTMENT When the label width designated in computer is smaller than the printing width
actually available, adjust half the difference by moving towards the right side.
-ADJUSTMENT When the label width designated in computer is larger than the printing width
actually available, adjust half the difference by moving towards the left side.
4
Press the key.
Confirm the adjustment option and return to selection of setting menu.
Press the key
to return to selection of
setting mode.
Pressthe key
and return to selection
of a setting menu.