Nitto DURA SI600, Instruction Manual

Page: 62 / 175

SETUP PROCEDURE
3-14
3.3.1 Printing Mode Settings
Set the operations after printing is finished.
1
Display the “PRINTING MODE”
menu under “LABEL SET” (Edit)
mode.
The current preset value will be displayed
in the fourth line on the LCD.
2
Press the key.
Move to selection of PRINTING MODE
and the option line will be displayed in
reverse video.
3
Turn the dial to display a
random type of printing mode.
Printing Mode Operation
CONTINUOUS The media will be issued continuously.
TEAR OFF After cutting off the issued media, rewind back to printing position and go on
with the next issuing operation.
CUTTER Cut off the issued media and move on to the next issuing operation.
* It is enabled when the printer is installed with Cutter Unit (option).
* The maximum cutting capacity is 40 cut/minute.
DISPENSER
Peel off the issued media, stand by for a certain period of time, and move on to
the next issuing operation.
* It is enabled when the printer is installed with Dispenser Unit (option).
4
Press the key.
Confirm the printing mode and return to selection of setting menu.
Pressthe key and
return to selection of a
setting menu.