Nitto DURA SI600, Instruction Manual

Page: 44 / 175

BASIC OPERATIONS
2-8
Adjust the Home Position of Label
If the printed label shows slippage, adjust the home position of label.
* Increase the value for adjustment to the home position of label that has been set up in print
configuration, and the results indicates the acutal home position.
[Example] Adjust the home position by 0.83 mm.
1
Press the key.
“HOME POSITION” is displayed on the
LCD, and the value line is displayed in
reverse video.
2
Turn the dial and change the
adjustment value.
Range for adjustment
：
-50.000mm ~ 50.000mm
Adjustment interval
：
0.042mm
3
Press the key.
Confirm the adjustment value to return to
previous scene, and one piece of label will
be test-printed.
Confirm the printing position shown on the
printed label. If further adjustment is
necessary, do the operations again from step
1.
Press the key,
and operation will be
suspended.
If there is data waiting
to be printed, this
operation cannot be
done.
Please go on with this
operation after
deleting the data or all
printings are finished.