Nitto DURA SI600, Instruction Manual

Page: 30 / 175

BEFORE OPERATION
1-14
1.5 Installing the Label Roll
1.5.1 Installing the Label Roll
Here is an explanation of how to install the Label Roll.
1
Press on the [ O ] side of the
Power Switch and power is
turned OFF.
Power Lamp goes out, and the power source
is disconnected.
2
Open the Side Cover.
3
Pull the Head Lock Lever
upwards and towards available
directions.
The Thermal Head is lifted.
4
Keep the Dumper Arm released.
Hold and lift the Dumper Arm upwards to
its maximum limit till it gives a clicking
sound indicating that it is fastened.
When opening the
side cover, please
open it completely
untill the top surface of
the cover touches the
printer main part. If you
release your hands
when the cover is half
open or in the midway
of opening/closing it,
the cover might fall
and result in injury
and/or malfunction.
When handling the
Head Lock Lever,
please do not put
your fingers and/or
hands near the tuning
area of thermal head.
It might cause injury.