Nitto DURA SI600, Instruction Manual

Page: 57 / 175

SETUP PROCEDURE
3-9
3.2.2 Edit Print Configuration
Below is an explanation of how to edit print configuration.
The changed print configuration cannot be restored with the printer alone.
Before any change, please keep back-up data in your computer or CF card.
1
Turn the dial under LABEL SET
mode to display “EDIT” on the
scene.
2
Press the key.
Move to selection of print configuration,
and the Label No. line will be displayed in
reverse video.
3
Turn the dial to display the
edited print configuration (Label
No.).
4
Press the key.
Move to EDIT operation and a message of
“PRINTING MODE” will be displayed in
the third line of the setting menu on the
LCD.
5
Turn the dial to display the
setting menu.
Please complete all operations on the entire
setting menu that need editing.
For the specific options of setting menu for
print configuration, please read “
 Setting
Menu for Print Configuration” on page 3-10.
Press the key,
and return to selection
of setting mode.
Press the key,
operation will be
stopped and the menu
returns to selection of
operation option.
Press the key,
and you will return to
selection
of print
configuration.