Nitto DURA SI600, Instruction Manual

Page: 60 / 175

SETUP PROCEDURE
3-12
3.3 Various Settings of Print Configuration
This section explains the operational procedures of various settings under Label Set mode.
Depending on the printing media used, print method of the printer and usage, settings of the print configuration are different.
Following is an explanation about the various settings related to different media and the size under different printing modes.
* The maximum label width available for setting is within the range of print size range of 109.0 mm.
For details about the available label width settings, please read “6.2 Specifications” on page 6-4.

Using Label with Backing Paper
If label with backing paper is used, it is necessary to complete the settings below like printing position and size of the
printed label.

Using Label with I-Mark
If label with I-Mark is used, it is necessary to complete the settings below like printing position and size of the printed label.