Nitto DURA SI600, Instruction Manual

Page: 170 / 175

APPENDIX
6-3
Error Message
Cause Measure
RS-232C Parity Error Communication settings of RS-232C do
not fit. Confirm the communication configuration
and make it fit.
RS-232C Framing
Error 1. Communication settings of RS-232C
are not correct.
2. Cable connection abnormal.
3. Wrong cable type.
1. Please confirm the communication
configuration and properly set it.
2. Please confirm the connection of cable.
3. Please confirm that inter-link cable is
used.
Head Mismatch
1. Thermal head is not installed.
2. The type of the installed head does not
match, such as different head density.
1. Please disconnect power source and
install thermal head.
2. Please install the right type of thermal
head.
TYPE OF HEAD
IS DIFFERENT
PLEASE EXCHANGE
THE HEAD
The type of the installed head does not
match, such as different head density. Please install the right type of thermal
head.
TYPE OF MACHINE IS
DIFFERENT.
PLEASE ANY KEY TO
CHANGE TO UPDATE
MODE
Firmware does not match the printer
type. Please update the version so that the
firmware matches the printer type.

If the problem cannot be solved in any way
If you cannot find the cause to your problem, or cannot restore the machine to previous status,
please contact the store where you bought the printer. And before that, please first confirm the
following and let the service people know the information.

The type of the printer

Service conditions

Phenomenon (under what environment the printer was used, what happed after what you have
done, what error message was displayed)

Date and time of the trouble happening