Nitto DURA SI600, Instruction Manual

Page: 108 / 175

SETUP PROCEDURE
3-60
3.4.22 Setting of End Label Processing
Set whether to make the last print as an error to indicate running out of label when the last label
on the backing paper is printed out.
1
Under advanced mode, turn the
dial to display “END LABEL
PROCESSING”.
The current setting will be displayed in the
third line on the LCD.
2
Press the key.
Move to selection of end label processing
operations and the option line will be
displayed in reverse video.
3
Turn the dial to display a random
setting option.
Setting Content
DISABLE Error occurs to the last label and it is regarded as a label to be disposed of.
ENABLE Error does not occur to the last label and effective printing of the last page of label
can be properly finished.
4
Press the key.
Confirm the settings of end label processing and return to selection of setting menu.
Press the key
to return to selection of
setting mode.
Pressthe key
and return to selection
of a setting menu.