Nitto DURA SI600, Instruction Manual

Page: 115 / 175

SETUP PROCEDURE
3-67
7
Press the key.
Move to the operation of setting gateway and the first input area will be displayed in reverse video.
8
Turn the dial to display a random Gateway and press the
key (or
the
key) to switch to the next input area.
When all of the input areas for gateway value are set, confirm the communication settings and the
printer will be restarted.
3.5.3 Communication Settings of RS-232C
Set communication protocol when RS-232C interface is installed.
1
Turn the dial under certain
interface mode to display “RS-
232C PROTOCOL”.
The current setting will be displayed in the
fourth line on the LCD.
2
Press the key.
Move to selection of protocol and the option
line will be displayed in reverse video.
3
Turn the dial to display a random
type of protocol.
* When “STATUS” is selected from
the list of protocols, the protocol
that has been selected in menu “1
PROTOCOL” (Please refer to “3.5.1
Setting of Protocol” on page 3-65
4
Press the key.
Confirm the communication settings and
return to selection of setting menu.
Press the key,
settings is confirmed
and the printer will be
restarted.
Press the key
to return to selection of
setting mode.
Press the key
to return to selection of
setting menu.