•
An EQ can only form part of one link.
•
There is no limit to the number of EQ links that can be created,
nor to the number of EQs that may be part of that link.
•
EQ links can be set across multiple EQ cards, they are not limited
to just within one 8-fader section of the desk.
•
EQ links form part of the console snapshot that is taken in the
background, and if the option is set in
System
, this will load when
the desk is rebooted.
• The EQ links form part of any Recall Stores created, and any/all the EQ
links will be recalled when the store is recalled.
To Interrogate EQ Links
u
Press (and hold) the
F5
button or click (and hold) on the
Show Links
button on screen. The channel
SEL
buttons will light to show those EQs
that form part of a link.
On screen, the currently displayed channel will also show which EQs it is
linked to by displaying those channels in a drop-down list to the right of
the screen.
u
Once interrogated, release the
F5
button / mouse button.
To Copy EQ
Settings From One Path To Another
This allows EQ settings to be copied from one channel to another, but
without creating a subsequent link between all controls.
This is typically used for copying EQs from the left side of a stereo path to
the right.
u
Call the EQ you wish to copy from on-screen by pressing it's Channel
SEL
button.
u
Press the
F2
button (or click
Copy
on-screen)
u
Using the channel
SEL
buttons, call the EQ you wish to copy
to
on-
screen.
u
Press the
F3
button (or click
Paste
on-screen)
All the EQ settings will be copied from the first EQ to the second, and a
confirmation message will be shown on-screen.
These settings will remain on the clipboard should you need to paste them
to other paths.
- 98 -
