AES Ch 1/2 Sync
The AES sync can be derived from the AES channels 1 and 2 Digital Line
Input. This has the advantage of not needing an extra cable to supply
just the sync.
To set which of the cards receives the
AES Channel 1&2
Sync, please go
to the main software Configuration screen on page 152 to see how this is
set.
If you wish to take the sync input by the same method by on the Monitor
card, the AES sync is derived from the
DEXT L&R
input signal.
FireWire
There are a pair of FireWire ports on each Master card and Monitor card
labelled
A
and
B
. The DAW computer should be connected to port
A
, and
port
B
forms a simple 'daisy-chain' through the Monitoring and any the
other Master cards in the system (where fitted).
The FireWire chain can be started at any point in the console, it does not
necessarily have to start with the first AD/DA card.
Before cabling the FireWire, please ensure the the Genesys and the DAW
are switched off.
- 147 -
