DIRECT OUTPUT Section
Master Level
Sets the level of the Direct Output, and has a range of -∞ to +10dB.
In it's default state there will be no output and all of the associated leds
will be unlit (Off).
The control is a 6-state toggle, and pressing it will cycle the Direct Output
to be fed from (1
st
press):
•
Channel
input,
Pre
processing,
Pre
fader,
Pre
CUT (
PRE
LED lit)
•
Channel
input,
Post
processing,
Pre
fader,
Pre
CUT (
PRE
&
CH
leds lit)
•
Channel
input
Post
processing,
Post
fader,
Post
CUT (
CH
LED
lit)
•
Monitor
input,
Post
processing,
Pre
fader,
Pre
CUT (
PRE
&
MON
leds lit)
•
Monitor
input,
Post
processing,
Post
fader,
Post
CUT (
MON
LED
lit)
•
OFF
(all leds unlit)
NB:
When in Mix mode the Channel input selection is not possible so as
to prevent feedback via the DAW (the PRE LED will flash to
indicate this).
- 50 -
