Channel and Monitor Path Drag and Drop Order Processing (ORD Button)
You can manually control the channel processing order using the ORD
button on the Channels to set/show the order processing of the
EQ/DYN/INS1/INS2 (elements).
However, it is also possible to set the processing order by using the click,
drag and drop method as well.
This feature gives you the ability to control the processing order via the
ORD screen software. This feature allows you to drag and drop the various
processing elements as well as the ability to bypass the elements from the
audio path.
u
Pressing the
ORD
button on the Genesys software will show up the
Channel Processing screen.
u
You can also enter the ORD screen by pressing and holding the channel
(yellow) SEL button then at the same time pressing the channel ORD
button.
The screen shows the elements and their order depending on what path
they are in. Below the elements there is a green
BYPASS
button.
u
By clicking this button it will bypass the element from the current
Channel or Monitor path it is assigned to.
u
To the left is a button called
Bypass ALL
. This will toggle bypass of all
the elements in the current Channel or Monitor path.
u
With the mouse, left click and hold on any of the elements (above the
BYPASS button) and drag them into the channel or monitor path or by
dragging them to the left or right of where they are currently assigned
then releasing the mouse button, will assign the element to where you
want it to go.
At the bottom is the
EQ In SideChain
indicator section. This is an
indication only to show whether the EQ is in the Dynamics sidechain.
u
Once the EQ is in the sidechain it cannot be dragged or dropped. You
can still click the BYPASS button to bypass the EQ whilst in the sidechain.
You cannot drag and drop elements into this section, such as DYN or
INS1/INS2.
Below the DAW button on the Monitor Panel there are two buttons one
with an arrow pointing left and the other with an arrow pointing right.
u
Pressing these will allow you to change the channel you are currently
on.
u
Double-clicking on the EQ or DYN element in the ORD screen will open
the EQ or Dynamics screen on that channel, for fast interrogation and
control of the selected element.
- 48 -
