operation of the CUES will also be changed from momentary to latching in
TB Latch mode.
TB Output Enable
This control if ticked will allow CUE1 and CUE2 to turn on the TB Relay
allowing for an extra TB level control output to be sent to the studio TB
system.
Lock Monitor Level
When enabled, this prevents the large main monitor knob from being able
to set the DIM/AFL/PFL/SIF values, so pressing the knob will not light any
of the leds underneath, nor allow you to change their settings.
DLine Enable
Only applicable on consoles that are fitted with at least one Channel
AD/DA cassette.
When enabled, this will take the
DLN
input, and feed it into the
DAW
RTN
path, meaning that the digital line input can be monitored through
the Monitor section. If
DAW
is selected at the top of the channel strip
when this option is ticked, this input will be forced into
DLN
to prevent
possible feedback.
Similarly, with this option ticked,
DAW
cannot be select as an input.
Instead, when you toggle round the options by pressing the
Trim
pot, the
DAW
LED will flash once to show it cannot be selected, and the input will
be set to the next available selection.
Power Up
On power-up, the console can be set to one of four states:
Default
This is the AMS Neve default Read-Only setup (loads the 2T MIX setup).
As Was
The console takes a snapshot of itself between every five to sixty minutes
(including all routing, pre/post states etc), and it is this snapshot that will
be loaded when the console is first powered up.
See the
Settings/Services
sub-section of the manual for details on
setting up the As Was snapshot frequency.
Last Store Made
Loads the last store that was created.
NB: this is the last store Saved, not the last one Loaded.
Custom Store
The user can set up a default store and have this loaded every time the
console powers-up as a custom starting template.
These four options are interlocked.
OSC
Osc With Slate
Sends Osc tone with the Talkback when Slate is pressed, eg when slating
a tape machine.
Osc to 2T
Without this option ticked, enabling the Tone and pressing the
2T/MIX
- 111 -
