will only be heard if INT is selected, and Externals 1 to 4 will only
be heard if EXT is selected.
EXT 1
&
EXT 2
u
When selected, will light yellow and selects either of the 6-wide
External inputs to the monitor system.
u
For
EXT 2
, pressing the button again will light the
D-EXT
LED as well,
so the 2nd set of 6-wide External paths will be taken from the AD/DA
cassette (if present) instead.
All the Externals buttons will interlock unless
SUM
is selected.
EXT 3
&
EXT 4
u
When selected, will light yellow and select either of the Stereo External
inputs to the monitor system.
D-EXT
LED
u
The
D-EXT
LED will light on the second press of
EXT 2
.
It is possible to have two sets of six-wide Externals on
EXT 2
.
The second set can be selected by pressing the
EXT 2
button again.
u
1st press takes the 1st set of External feeds from the Analogue inputs
(
EXT 2
will light)
u
2nd press takes the 2nd set of External feeds from the Digital Inputs
(if these are present,
EXT 2
and the
D-EXT
LED will light)
The
D-EXT
LED will only light if an AD/DA cassette has been detected.
If there is no cassette, it will not be possible to select
D-EXT
.
INT
u
Lights yellow when selected and makes possible the selection of the
internal monitors (Auxes, Cues etc) to the control room loudspeakers.
EXT
u
Will light yellow when selected, and makes possible the selection of the
External monitors (
EXT 1
etc) to the control room loudspeakers.
INT
and
EXT
are interlocked.
If
SUM
is selected, the interlock between
INT
and
EXT
is cancelled.
SUM
u
Lights yellow when selected and affects the
INT
and
EXT
as described
above, so a collection of Internal and External sources can be heard at
once.
It will also enable all of the internal and external
LS
buttons (including
INT
and
EXT
monitor selections) to be turned on and off individually.
In this mode,
8T
and
2T
on the internal monitor will still be interlocked.
INS
Lights yellow and activates the 5.1 Monitor inserts.
- 73 -
