SLATE
This level control and momentary push switch can be used to set the Slate
level to
Channel Output
,
8T
,
2T
and
Main Mix
Outputs.
It has a range of -∞ to 0dB.
It will also turn on the
DIM
button and the monitoring will be dimmed by
an amount set by
TB DIM
.
SLATE
can also be set to include tone from the oscillator to provide a tape
oscillator slate (this is done via the
Settings
screen, by ticking
Osc With
Slate
).
If this is the case, when pressing the Slate knob, it will also be sent to
CH
,
8T
and
2T/MIX
.
As stated, it is possible to Slate the console Outputs by external operation,
in which case the
SLATE
light will flash along with
DIM
to show remote
control.
If
RTB
is on
M2
, then Slating will also temporarily suspend the RTB
Talkback.
TB
This level control and momentary push switch can be used to set Talkback
level and to talk to the TB Output jack on the rear of the console.
The level has a range of -∞ to 0dB.
u
Press to operate, the yellow LED underneath will light and Talkback will
be sent to TB Output.
This will also dim the monitoring by an amount set by
TB DIM
(and light
the
DIM
button).
If
RTB
is on
M2
, then applying TB will temporarily suspend the Return
Talkback.
TB ALL
This momentary push switch can be used to send
Talkback
to
CUE1
,
CUE2
&
TB
out destinations.
The LED lights yellow for the length of the press, and the talkback will be
sent to all available destinations.
This action will also light the
DIM
button, and dim the monitoring by an
amount set by
TB DIM.
If
RTB
is on
M2
, then Operating all will temporarily suspend the Return
Talkback.
RED LIGHT
Lights red and allows for a studio 'recording light' to be switched on and
off from the console surface, or remotely via the
DC REMOTE
connector
on the rear of the console.
Spare Button
Located next to the TB ALL control, this control is software mapped to
control the 'Spare I/O Pin' on the DC remote connector allowing for a
switched output. Useful for control of external TB systems.
Talkback Enable (Located in the Settings screen)
This control if ticked will allow CUE1 and CUE2 to turn on the TB Relay
- 82 -
