DAW Computer Settings
Mac OS X (DAW Computer)
u
On your Mac DAW computer, from the
Apple
menu, select
System
Preferences
/
Network
. From the resulting screen;
When
not
using a hub/studio network and connecting the Genesys
computer directly to the DAW computer using a crossover cable:
u
Select
Ethernet 1
(or the primary/connected ethernet
connection) in the left hand window, and select
Manually
from
the pull-down menu next to
Configure IPv4.
u
Now set your DAW computer to these settings:
•
IP Address:
192 . 168 . 99 . 183
•
Subnet Mask:
255 . 255 . 255 . 0
•
Make sure the Router setting is blank.
If a direct connection is not made, i.e. you are connecting via a router or
hub (through your studio/company network):
u
Select
Ethernet 1
(or the primary/connected ethernet
connection) in the left hand window, and select
Using DHCP
from the pull-down menu next to
Configure Ipv4.
u
Finally click
Apply
and close the Network/System Preferences
windows.
Windows 7 (DAW Computer)
u
On your Windows 7 DAW computer, from the
Start Menu
, select
Control Panel
(Small or Large icons View)
/ Network Sharing Centre /
Change adapter settings / Local area Connection/ Properties.
Select
Internet Protocol Version 4 (TCP/IPv4)
from the list (make
sure the tick box remains selected) and click
Properties.
When
not
using a hub/studio network and connecting the Genesys
computer directly to the DAW computer using a cross-over cable:
u
Select
Use the following IP address:
and set your DAW
computer to these settings:
•
IP Address:
192 . 168 . 99 . 183
•
Subnet Mask:
255 . 255 . 255 . 0
•
Make sure the Default gateway / DNS settings are blank.
If a direct connection is not made, i.e. you are connecting via a router or
hub (through your studio/company network):
u
Select
Obtain an IP address automatically
.
u
Select
Obtain DNS server address automatically.
u
Finally click OK
and close the Local Area Network/Control Panel
windows.
Windows XP (DAW Computer)
u
On your Windows XP DAW computer, from the
Start Menu
, select
Control Panel
(Classic View)
/ Network Connections / Local Area
Connection / Properties.
Select
Internet Protocol (TCP/IP)
from
the list (make sure the tick box remains selected) and click
Properties.
When
not
using a hub/studio network and connecting the Genesys
- 27 -
