i.e.
Rack 1 – 1-4
Rack 2 – 5-8
Rack 3 – 9-12
Rack 4 – 13-16 etc.
u
Click OK.
In green at the bottom of the main screen, it will now state which selected
Genesys channels (as above) the channel racks are connected to.
u
You can now put the Genesys Channel Encoder into 4081 mode.
u
Click
Settings
on the Genesys menu bar.
u
In Settings, in the section labelled
'Channel FNC Control'
, select the
option
4081 MIC Control
by clicking the tick box.
u
Return to the 4081 screen.
On the Genesys channel strip, push Channel encoder at the top (red)
ensuring that FNC is selected (LED will light green).
With the Channel strip, you can control:
u
48V
u
-20
u
LOW Z
u
Ø
The remaining buttons
MIC/LINE
and
INS
are controlled via the
software.
Turning the encoder on the Channel strip will change the MIC gain.
When you assign a 4081 to Genesys, the 4081 switches will light red. This
means that the 4081 is locked out and can only be controlled using
software or Genesys channel strips. Otherwise the switches will light
yellow.
- 166 -
