Down Mix To
When a Surround mix is collapsed down to Stereo, this down-mix can also
be tied to a set of loudspeakers.
If the Down Mix is tied to the M1 speaker set, then selecting M1 will also
operate the stereo downmix via the ST button.
Sub Speaker Locks
Locks the house
sub
on the
A set
of loudspeakers to
B ,M1, M2
loudspeaker sets.
LS/RS Speaker Locks
Locks the house
LS/RS
on the
A set
of loudspeakers to
B ,M1, M2
loudspeaker sets.
Speaker Trims
u
Click the speaker set button you wish to set the Trims for (
A
,
B
,
M1
or
M2
).
For each of the six speakers, you now have +/-10dB of Trim to apply in
0.1dB steps.
u
Use the up/down arrows to scroll the value for each speaker.
8T Solo Linking
Channel to 8T
If ticked, the Channel Solos are linked to the 8T Solos, so that pressing
any Channel
SOLO
will also cut the 8Ts (and all the 8T
CUT
leds will
light).
If unticked, the 8Ts are safe from the Solo system.
Monitor to 8T
If ticked, the Monitor Solos are linked to the 8T Solos, so that pressing
any Monitor
SOLO
will also cut the 8Ts (and all the 8T
CUT
leds will light).
If unticked, the 8Ts are safe from the Solo system.
8T
If ticked, means the 8T busses are safe, so the 8T Mix is not affected
whenever an 8T
SOLO
is pressed.
If unticked, the Solo is destructive, and all of the other 8T busses are put
into Cut (and all of their
CUT
leds will light).
Other Options
AUTO TB
(with Play Delay)
Sets CUE 1 and 2 (Talkback, see page 81) to latching until Play is selected
from the Transport controls, at which point CUE TB is cancelled
immediately. The Play command is transmitted after the delay (in
seconds) has elapsed. Once Play is stopped, CUE 1 and 2 will be
reinstated, allowing CUE TB to continue with constant hands-free
communication to the TB destinations.
TB Latch
Interlocked with Auto TB. If ticked will turn CUE 1 and CUE 2 from
momentary to latching, even if Play is being cycled on the DAW. Remote
- 110 -
