Master SEL mode on the 8T AUXES Section
To Set Which Auxes Are Fed by the
8T
s
Aux 1 / Aux 2
u
Press and hold down
LOCK
on the Main Monitor Panel, then press
RTE
SEL
to enter Master SEL mode.
All of the console
SEL
leds will flash. Most of the 8T strip controls will have
their functionality blocked out, apart from those indicated in white, left.
Each press of the
AUX 1/2
level control will cycle the feeds through:
•
Aux
1
,
Post
fader
•
Aux
1
,
Pre
fader
•
Aux
2
,
Post
fader
•
Aux
2
,
Pre
fader
u
Exit Master SEL Mode at any point by pressing
RTE SEL
, and your
changes will be saved.
(After exiting Master SEL Mode, pressing the level control will turn the
contribution to that Aux On/Off).
Aux 5/Aux 6
For Auxes 5 and 6, the only settable control in Master SEL Mode is the
Pre/Post state.
u
Press and hold down
LOCK
on the Main Monitor Panel, then press
RTE
SEL
to enter Master SEL mode.
u
Press the relevant Aux control to switch it between
Pre
- and
Post
-.
u
Exit Master SEL Mode at any point by pressing
RTE SEL
, and your
changes will be saved.
Selecting between Aux 5 and Aux 6 is achieved by toggling the
L/R PAN
control.
In it's default state, it contributes to Aux 5 (LED off).
u
Press the
PAN
control to send to Aux 6 instead (LED will light).
It is not necessary to go into Master SEL Mode to make this selection.
- 58 -
