If you wish to record from a Line or DAW source, press the
+/-15
pot at
the top of each Channel strip to select the desired input.
The monitoring is already selected to the Main Mix, so once the
loudspeakers have been un-
CUT
, pushing up the Mix LR and channel
faders (or turning the Mon knob up) will send audio to the speakers.
The flow diagram illustrates the signal path through the console when the
Stereo Recording setup is loaded.
•
The Monitor level is set using the Monitor knob on the lower
section of the Channel strip. If you wish this control to be on the
fader instead, press the
SWP
button on the Master SEL panel to
swap all the faders over, or use the local
SWP
button to swap
individual faders.
The selected channel input signals will appear at the DAW to be recorded.
u
Toggle the Channel Strip
DAW
button between
SND
and
RTN
to either
monitor the signal being sent to the DAW or the signal being returned
from it.
- 38 -
