Mixer View
allows you to edit a single Send parameter on multiple
channel strips laid out across the Genesys console surface:
Send
Destination, Send Level, Send Position (Pre/Post/Post Pan), Send Mute.
The Genesys software (at the top) will indicate the function or mode you
are in along with the current Send,
[S1]
,
[S2]
...
[S8]
. DAW control
allows you to control up to 8 Logic Sends per track.
u
Press the
fader
SEL
button for Logic track 1 (or the first assigned DAW
track). You have now selected DAW track 1. You will see in the top right
corner the display indicator has changed to
01
(if not already) to indicate
you have selected track 1. The fader SEL button will also flash.
u
F1
and
F2
buttons are used to select which Send you are controlling.
Now keep pressing F1 until you are see that you are controlling
Send 1
,
[S1]
will be shown on the Genesys software.
u
F3
and
F4
buttons are used to select the Send
Destination/Level/Position/Mute parameter. Now keep pressing F3 until
you are are controlling the
Send Destination
parameter. This will be
shown on the Genesys software on the top-most line.
The Genesys software should now show the following information on the
top-most line:
Send Mixer View – Send Parameter: Destination [S1]
u
On the channel strip using the Ch V-Pot (large red encoder) for the
selected track turn the encoder and the Destination will change,
Bus 1,
Bus 2... Bus 64.
This will be shown on the Genesys software as you
change the parameter.
u
Press the Ch V-Pot (like you would do to a push-button) and the
Destination will be set. Confirm this by looking at Logic Pro for track 1,
send slot 1.
u
In a similar way you can change the Destination for all other DAW
tracks.
u
Press
F4
. You are now controlling the
Send Level
for Send 1. Turn
the Ch V-Pot and the Send Level will change, you can see the Genesys
software and Logic Pro to verify this.
u
Pressing the Ch V-Pot you can set the Send Level to its default setting.
Press the Ch V-Pot, the Send Level will default to 0 dB. Confirm this by
looking at Logic Pro for track 1, send slot 1.
u
In a similar way you can change the Send Level for all other DAW
tracks.
u
Press
F4
. You are now controlling the
Send Position
for Send 1. Turn
the Ch V-Pot
slowly one click/notch at a time up to a maximum of 2-left
or 2-right
and the Send Position will change from
Pre
to
Post
to
Post
Pan.
You can see the Genesys software and Logic Pro to verify this.
u
In a similar way you can change the Send Position for all other DAW
tracks.
u
Press
F4
. You are now controlling the
Send Mute
for Send 1. Press
the Ch V-Pot and the Send Mute will change from
Mute
to
Active.
You
can see the Genesys software and Logic Pro to verify this.
u
In a similar way you can change the Send Mute for all other DAW
tracks.
u
Press
F5
and
FLIP
should now be on. With FLIP on the Genesys faders
will now have the same functionality as the Ch V-Pots. Press
F3
until you
are once again controlling the Send Level. Now with FLIP on move the
Genesys fader for DAW track 1. The Send Level will change, confirm this
by looking at Logic Pro and Genesys software.
- 178 -
