AUXES Section
Master Aux Level
Sets the output contribution of the Aux.
It has a range of -∞ to 0dB.
u
Press to enable, and the adjacent LED will light.
>8T buttons
Sets the destination and level control for sending the Auxes to the last two
8T busses
Different destinations apply depending on whether the Aux is mono or
stereo.
•
Aux 1
and
Aux 3
will be sent to
8T 7
•
Aux 2
and
Aux 4
will be sent to
8T 8
u
Press the
>8T
button next to the Aux to send it to it's associated 8T
buss (the LED will light).
Aux 5 and Aux 6 will be sent to both 8T 7 & 8T 8 as a stereo pair.
In it's default state, the
PAN
and
8T 7/8
buttons apply to
Aux 5
.
u
To set this to be
Aux 6
, press the
PAN
control.
The adjacent LED will light.
It is not possible to make contributions to both
Aux 5
and
Aux 6
at the
same time on the same channel.
When an Aux is sent to an 8T buss, then the contribution to the Aux buss
is disconnected but the
ON
LED will still work as normal.
Master SEL mode on the AUXES Section
To Set How the Channel and Monitor Paths Feed the Auxes
Either the Channel
or
Monitor path can be set to feed the Aux, either
Pre
-
or
Post-
fader. It is not possible for both paths to feed the same aux at
the same time.
Setting the Pre / Post states is the same, regardless of whether the aux is
mono or stereo.
u
Press and hold down
LOCK
on the Main Monitor Panel, then press
RTE
SEL
to enter Master SEL mode.
All of the Channel Strip
SEL
leds will flash.
Most of the strip controls will have their functionality blocked out, apart
from those indicated in white, left.
Setting the AUX pre/post
Pressing the level control will cycle the Aux through the following options:
•
Channel
path,
Post
- fade (with no leds lit)
•
Channel
path,
Pre
- fade (
Pre
LED lit)
•
Monitor
path,
Post
- fade (
Mon
LED lit)
•
Monitor
path,
Pre
- fade (
Pre
&
Mon
LED lit)
The selection will be displayed on the adjacent leds.
u
Exit
Master SEL
mode by pressing the
RTE SEL
button again.
After exiting Master SEL Mode, pressing the level control will turn the
contribution to that Aux On/Off.
- 49 -
