7000 Series L3 Managed Switch Reference Manual for Software v1.0
Switching Commands
7-21
May 30, 2003 Beta Draft
Authentication Flag
May be enabled or disabled by selecting the corresponding line
on the pull-down entry field. The factory default is enabled. Indi-
cates whether authentication failure traps will be sent.
Link Up/Down Flag
May be enabled or disabled by selecting the corresponding line
on the pull-down entry field. The factory default is enabled. Indi-
cates whether link status traps will be sent. Multiple Users Flag.
Multiple Users Flag
May be enabled or disabled by selecting the corresponding line
on the pull-down entry field. The factory default is enabled. Indi-
cates whether a trap will be sent when the same user ID is logged
into the switch more than once at the same time (either via telnet
or serial port).
Spanning Tree Flag
May be enabled or disabled by selecting the corresponding line
on the pull-down entry field. The factory default is enabled. Indi-
cates whether spanning tree traps will be sent.
Broadcast Storm Flag
May be enabled or disabled by selecting the corresponding line
on the pull-down entry field. The factory default is enabled. Indi-
cates whether broadcast storm traps will be sent.
config trapflags authentication
This command enables or disables the Authentication Flag.
Default
enable
Format
config trapflags authentication
<enable|disable>
config trapflags bcaststorm
This command enables or disables the broadcast storm trap. When enabled, broadcast storm traps
are sent only if the broadcast storm recovery mode setting associated with the port is enabled (see
“config switchconfig broadcast” on page 25).
Default
enable
Format
config trapflags bcaststorm
<enable|dis-
able>
Summary of Contents for ProSafe GSM7324
Page 4: ...May 30 2003 Beta Draft iv...