7000 Series L3 Managed Switch Reference Manual for Software v1.0
7-60
Switching Commands
May 30, 2003 Beta Draft
Designated Root
The Identifier of the designated root for this port.
Designated Port Cost
Path Cost offered to the LAN by the Designated Port
Designated Bridge
B
ridge Identifier of the bridge with the Designated Port.
Designated Port Identifier
Port on the Designated Bridge that offers the lowest cost to the
LAN
show spanningtree vlan
This command displays the association between a VLAN and a multiple spanning tree instance.
The <vlan> corresponds to an existing VLAN ID.
Format
show spanningtree vlan <vlan>
VLAN Identifier
Associated Instance
Identifier for the associated multiple spanning tree instance or
"CST" if associated with the common and internal spanning tree
User Account Management Commands
These commands manage user accounts.
show users
This command displays the configured user names and their settings. This command is only
available for users with readwrite privileges. The SNMPv3 fields will only be displayed if SNMP
is available on the system.
Format
show users
User Name
The name the user will use to login using the serial port, Telnet or
Web. A new user may be added to the switch by entering a name
in a blank entry. The user name may be up to 8 characters, and is
not case sensitive. Two users are included as the factory default,
admin and guest
Access Mode
Shows whether the operator is able to change parameters on the
switch(Read/Write) or is only able to view them(Read Only). As
a factory default, admin has Read/Write access and guest has
Summary of Contents for ProSafe GSM7324
Page 4: ...May 30 2003 Beta Draft iv...