NETGEAR ProSafe GSM7324, Reference Manual, Page: 123 / 263

7000 Series L3 Managed Switch Reference Manual for Software v1.0
Switching Commands 7-65
May 30, 2003 Beta Draft
7000 Series L3 Managed Switch Software provides two methods to clear the directory path
statement.
• The
clear config
command will remove the directory path statement.
• The web browser clear command will remove the directory path statement.
Default
Blank
Format
transfer upload path <path>
transfer upload filename
This command sets the name for the file that is uploaded from the switch. The switch “remembers”
the last file name used.
Append the file path to the file name if the string is less than 31 characters. Otherwise, use the
“transfer upload path” command, and the File Name will be appended to the File Path.
Note: This command is valid only when the Transfer Mode is TFTP. See“transfer upload mode” .
Default
Blank
Format
transfer upload filename <name>
transfer upload datatype
This command sets the type of file to upload from the switch.
Format
transfer upload datatype <config|error-
log|msglog|traplog>
The datatype is one of the following:
config
Configuration file
errorlog
Error log
msglog
Message log
traplog
Trap log (the default)
Table 3. TFTP Upload Example.
TFTP Server path TFTP Client path
c:\tftp\ blank
c:\ tftp\
c: \tftp\