7000 Series L3 Managed Switch Reference Manual for Software v1.0
Routing Commands
8-9
May 30, 2003 Beta Draft
config trapflags ospf
This command enables or disables OSPF traps.
Default
enable
Format
config trapflags ospf
<enable|disable>
config router ospf adminmode
This command sets the administrative mode of OSPF in the router to active or inactive.
Default
disable
Format
config router ospf adminmode
<enable|dis-
able>
config router ospf asbr
This command determines whether the router can act as an autonomous system border router.
Default
disable
Format
config router ospf asbr
<enable|disable>
config router ospf preference
This command sets the route preference value of OSPF in the router. Lower route preference
values are preferred when determining the best route. The type of OSPF can be intra, inter, type-1,
or type-2. The range of preference is 0 to 255.
Default
Intra -- 8; Inter -- 10; Type-1 -- 13; Type-2 -- 150.
Format
config router ospf preference
<intra/inter/
type1/type2> <0-255>
show router ospf interface info
This command displays the information for the IFO object or virtual interface tables.
Format
show router ospf interface info
<slot.port>
IP Address
Represents the IP address for the specified interface. This is a
configured value.
Summary of Contents for ProSafe GSM7324
Page 4: ...May 30 2003 Beta Draft iv...