manualshive.com logo in svg

NETGEAR ProSafe GSM7324, Reference Manual, Page: 102 / 263

Share
Download
NETGEAR ProSafe GSM7324 Reference Manual Download Page 102

7000 Series L3 Managed Switch Reference Manual for Software v1.0

7-44

Switching Commands

May 30, 2003 Beta Draft

show mfdb gmrp

This command displays the GARP Multicast Registration Protocol (GMRP) entries in the 
Multicast Forwarding Database (MFDB) table. 

Format  

show mfdb gmrp

Mac Address  

A unicast MAC address for which the switch has forwarding and 
or filtering information. The format is 6 or 8 two-digit hexadeci-
mal numbers that are separated by colons, for example 
01:23:45:67:89:AB. In an IVL system the MAC address will be 
displayed as 8 bytes. In an SVL system, the MAC address will be 
displayed as 6 bytes.

Type  

This displays the type of the entry. Static entries are those that are 
configured by the end user. Dynamic entries are added to the 
table as a result of a learning process or protocol.

Description  

The text description of this multicast table entry. 

Interfaces  

The list of interfaces that are designated for forwarding (Fwd:) 
and filtering (Flt:).

show mfdb igmpsnooping

This command displays the IGMP Snooping entries in the Multicast Forwarding Database 
(MFDB) table. 

Format  

show mfdb igmpsnooping

Mac Address  

A unicast MAC address for which the switch has forwarding and 
or filtering information. The format is 6 or 8 two-digit hexadeci-
mal numbers that are separated by colons, for example 
01:23:45:67:89:AB. In an IVL system the MAC address will be 
displayed as 8 bytes. In an SVL system, the MAC address will be 
displayed as 6 bytes.

Type  

This displays the type of the entry. Static entries are those that are 
configured by the end user. Dynamic entries are added to the 
table as a result of a learning process or protocol.

Description  

The text description of this multicast table entry. 

Interfaces  

The list of interfaces that are designated for forwarding (Fwd:) 
and filtering (Flt:).

Summary of Contents for ProSafe GSM7324








































































































































































































































































Reviews:

No comments