7000 Series L3 Managed Switch Reference Manual for Software v1.0
8-2
Routing Commands
May 30, 2003 Beta Draft
Type
Is the type that was configured into the unit. The possible values
are Local, Gateway, Dynamic and Static.
config arp agetime
This command configures the ARP entry ageout time.
The value for <seconds> is a valid positive integer, which represents the IP ARP entry ageout time
in seconds. The range for <seconds> is between 15-3600 seconds.
Default
1200
Format
config arp agetime
<15-3600seconds>
config arp cachesize
This command configures the ARP cache size. The value for <cachesize> is a positive integer
between 10-128.
Format
config arp cachesize
<10-128>
config arp create
This command creates an ARP entry.
The value for <arpentry> is the IP address of the interface. <macaddr> is a unicast MAC address
for which the switch has forwarding and/or filtering information.
The format is 6 two-digit hexadecimal numbers that are separated by colons, for example
00:06:29:32:81:40.
Format
config arp create
<arpentry> <macaddr>
config arp delete
This command deletes an ARP entry. The value for <arpentry> is the IP address of the interface.
Format
config arp delete
<arpentry>
config arp resptime
This command configures the ARP request response timeout.
Summary of Contents for ProSafe GSM7324
Page 4: ...May 30 2003 Beta Draft iv...