7000 Series L3 Managed Switch Reference Manual for Software v1.0
Routing Commands
8-17
May 30, 2003 Beta Draft
config router ospf area stub summarylsa
This command configures the Summary LSA mode for the stub area identified by <areaid>. The
Summary LSA mode can be configured as enabled or disabled.
Format
config router ospf area stub summarylsa
<areaid> <enable/disable>
config router ospf area stub create
This command creates a stub area for the specified area ID. A stub area is characterized by the fact
that AS External LSAs are not propagated into the area. Removing AS External LSAs and
Summary LSAs can significantly reduce the link state database of routers within the stub area.
Format
config router ospf area stub create
<areaid>
config router ospf area stub delete
This command deletes a stub area for the specified area ID.
Format
config router ospf area stub delete
<areaid>
config router ospf area delete
This command removes the specified area from the router configuration.
The user is advised to disable OSPF before using this command.
Format
config router ospf area delete
<areaid>
show router ospf neighbor detailed
This command displays the OSPF neighbor table list. When a particular neighbor ID is specified,
detailed information about a neighbor is given. The information below will only be displayed if
OSPF is enabled and the interface has a neighbor. The IP address is the IP address of the neighbor.
Format
show router ospf neighbor detailed
<slot.port> <ipaddr>
Interface
Is the slot.port identifying the internal interface number of the
OSPF neighbor.
Router Id
Is a 4-digit dotted-decimal number identifying neighbor router.
Summary of Contents for ProSafe GSM7324
Page 4: ...May 30 2003 Beta Draft iv...