7000 Series L3 Managed Switch Reference Manual for Software v1.0
7-62
Switching Commands
May 30, 2003 Beta Draft
config users snmpv3 authentication
This command specifies the authentication protocol to be used for the specified login user. The
valid authentication protocols are
none
,
md5
or
sha
. If
md5
or
sha
are specified, the user login
password will be used as the snmpv3 authentication password. The
<user>
is the login user name
for which the specified authentication protocol will be used.
Default
no authentication
Format
config users snmpv3 authentication <user> <none/md5/
sha>
config users snmpv3 encryption
This command specifies the encryption protocol and key to be used for the specified login user.
The valid encryption protocols are
none
or
des
. The
des
protocol requires a
key
, which can be
specified on the command line. The
key
may be up to 16 characters long. If the
des
protocol is
specified but a key is not provided, the user will be prompted for the key. If
none
is specified, a key
must not be provided. The
<user>
is the login user name for which the specified encryption
protocol will be used.
Default
no encryption
Format
config users snmpv3 encryption <user> <none/des [key]>
config users snmpv3 accessmode
This command specifies the snmpv3 access privileges for the specified login user. The valid
accessmode values are
readonly
or
readwrite
. The
<user>
is the login user name for which the
specified access mode will apply.
Default
readwrite
for admin user;
readonly
for all other users
Format
config users snmpv3 accessmode <user> <readonly/readwrite>
Summary of Contents for ProSafe GSM7324
Page 4: ...May 30 2003 Beta Draft iv...