7000 Series L3 Managed Switch Reference Manual for Software v1.0
8-30
Routing Commands
May 30, 2003 Beta Draft
show router vrrp info
This command displays whether VRRP functionality is enabled or disabled on the 7000 Series L3
Managed Switch. It also displays some global parameters which are required for monitoring This
command takes no options.
Format
show router vrrp info
VRRP Admin Mode
Displays the admin mode for VRRP functionality on the switch.
Router Checksum Errors
Represents the total number of VRRP packets received with an
invalid VRRP checksum value.
Router Version Errors
Represents the total number of VRRP packets received with
Unknown or unsupported version number.
Router VRID Errors
Represents the total number of VRRP packets received with
invalid VRID for this virtual router.
config router vrrp adminmode
This command sets the administrative mode of VRRP in the router.
Default
disable
Format
config router vrrp adminmode <enable|disable>
show router vrrp interface detailed
This command displays all configuration information and VRRP router statistics of a virtual router
configured on a specific interface.
Format
show router vrrp interface detailed
<slot.port> <vrID>
IP Address
This field represents the configured IP Address for the Virtual
router.
VMAC address Represents the VMAC address of the specified router.
Authentication type Represents the authentication type for the specific virtual router.
Priority
Represents the priority value for the specific virtual router.
Advertisement interval
Represents the advertisement interval for the specific virtual
router.
Pre-Empt Mode
Is the preemption mode configured on the specified virtual router.
Administrative Mode
Represents the status (Enable or Disable) of the specific router.
State
Represents the state (Master/backup) of the specific virtual
Summary of Contents for ProSafe GSM7324
Page 4: ...May 30 2003 Beta Draft iv...