7000 Series L3 Managed Switch Reference Manual for Software v1.0
7-50
Switching Commands
May 30, 2003 Beta Draft
show spanningtree summary
This command displays spanning tree settings and parameters for the switch.
Format
show spanningtree summary
Spanning Tree Adminmode
Enabled or disabled.
Spanning Tree Version
Version of 802.1 currently supported (IEEE 802.1s, IEEE 802.1w,
or IEEE 802.1d) based upon the Force Protocol Version parame-
ter
Configuration Name
TConfigured name.
Configuration Revision Level
Configured value.
Configuration Digest Key
Calculated value.
Configuration Format Selector
Configured value.
MST Instances
List of all multiple spanning tree instances configured on the
switch
config spanningtree adminmode
This command sets the spanningtree operational mode. While disabled, the spanningtree
configuration is retained and can be changed, but it is not activated.
Default
disable
Format
config spaningtree adminmode <enable/dis-
able>
config spanningtree forceversion
This command sets the Force Protocol Version parameter to a new value. The <version> can be
one of the following:
•
802.1d - ST BPDUs are transmitted rather than MST BPDUs (IEEE 802.1d functionality
supported)
•
802.1w - RST BPDUs are transmitted rather than MST BPDUs (IEEE 802.1w functionality
supported)
•
802.1s - MST BPDUs are transmitted (IEEE 802.1s functionality supported)
Default
802.1s
Format
config spanningtree forceversion <802.1d/
802.1w/802.1s>
Summary of Contents for ProSafe GSM7324
Page 4: ...May 30 2003 Beta Draft iv...