7000 Series L3 Managed Switch Reference Manual for Software v1.0
Routing Commands
8-21
May 30, 2003 Beta Draft
Link State
Indicates whether the RIP interface is up or down. This is a con-
figured value.
Authentication Type
The RIP Authentication Type for the specified interface. The
types are none and simple. This is a configured value.
Authentication Key
The RIP Authentication Key for the specified interface. The
actual key will be **** to avoid compromising privacy. This is a
configured value.
Default Metric
A number which represents the metric used for default routes in
RIP updates originated on the specified interface. This is a con-
figured value.
The following information will be invalid if the link state is down.
Bad Packets Received
The number of RIP response packets received by the RIP process
which were subsequently discarded for any reason.
Bad Routes Received
The number of routes contained in valid RIP packets that were
ignored for any reason.
Updates Sent
The number of triggered RIP updates actually sent on this inter-
face.
show router rip interface summary
This command displays general information for each RIP interface. For this command to display
successful results routing must be enable per interface (i.e. config router rip interface <slot.port>
enable).
Format
show router rip interface summary
Slot.Port
Is the unit slot.port identifying each interface.
IP Address
The IP source address used by the specified RIP interface.
Send Version
The RIP version(s) used when sending updates on the specified
interface. The types are none, RIP-1, RIP-1c, RIP-2.
Receive Version
The RIP version(s) allowed when receiving updates from the
specified interface. The types are none, RIP-1, RIP-2, Both
RIP Mode
RIP administrative mode of router RIP operation; enable acti-
vates, disable de-activates it.
Link State
The mode of the interface (up or down).
Summary of Contents for ProSafe GSM7324
Page 4: ...May 30 2003 Beta Draft iv...