7000 Series L3 Managed Switch Reference Manual for Software v1.0
7-58
Switching Commands
May 30, 2003 Beta Draft
config spanningtree mst port priority
This command sets the priority for a specific port within a specific multiple spanning tree instance.
The instance <mstid> is a number that corresponds to the desired existing multiple spanning tree
instance. The <slot.port> is the desired switch port. The priority <value> is a number in the range
of 0 to 240 in increments of 16.
Default
128
Format
config spanningtree mst port priority
<mstid> <slot.port> <0-240>
show spanningtree mst summary
This command displays summary information about all multiple spanning tree instances in the
switch.
Format
show spanningtree mst summary
MST Instance ID List
List of multiple spanning trees IDs currently configured.
For each MSTID:
Associated FIDs
List of forwarding database identifiers associated with this
instance.
Associated VLANs
List of VLAN IDs associated with this instance.
show spanningtree mst detailed
This command displays settings and parameters for the specified multiple spanning tree instance.
The instance <mstid> is a number that corresponds to the desired existing multiple spanning tree
instance ID.
Format
show spanningtree mst detailed <mstid>
MST Instance ID
MST Bridge Priority
Time Since Topology Change
in seconds
Topology Change Count
Number of times the topology has changed for this multiple span-
ning tree instance.
Topology Change in Progress
Value of the Topology Change parameter for the multiple span-
ning tree instance
Designated Root
Identifier of the Regional Root for this multiple spanning tree
instance.
Summary of Contents for ProSafe GSM7324
Page 4: ...May 30 2003 Beta Draft iv...