7000 Series L3 Managed Switch Reference Manual for Software v1.0
6-6
Quick Startup
May 30, 2003 Beta Draft
Quick Start up Uploading from Switch to Out-of-Band PC (Only
XMODEM)
Quick Start up Downloading from Out-of-Band PC to Switch
(Only XMODEM)
Table 6-5.
Quick Start up Uploading from Switch to Out-of-Band PC (Only XMODEM)
Command
Details
transfer upload mode xmodem
Changes mode to xmodem which is initiated by the
serial EIA 232 port
transfer upload datatype
<config|errorlog|systemtrace|traplog>
The types are:
config - configuration file
errorlog - error log
system trace - system trace
traplog - trap log
transfer upload start
This starts the upload and also displays the mode of
uploading and the type of upload it is and confirms
the upload is taking place.
For example:
If the user is using HyperTerminal, the user must
specify where the file is going to be received by the
PC.
Table 6-6.
Quick Start up Downloading from Out-of-Band PC to Switch (Only XMODEM)
Command
Details
transfer download mode xmodem
Makes the download mode to be xmodem
transfer download datatype
<config/code>
Sets the download datatype to be an image or
config file.
The default is a code file.
transfer download start
For example:
If the user is using HyperTerminal, the user must
specify which file is to be sent to the switch.
The Switch will restart automatically once the
code has been downloaded.
Summary of Contents for ProSafe GSM7324
Page 4: ...May 30 2003 Beta Draft iv...