7000 Series L3 Managed Switch Reference Manual for Software v1.0
Switching Commands
7-49
May 30, 2003 Beta Draft
If all is selected, all ports will be added to the destination port filter set.
Format
config macfilter adddest
<macaddr> <vlan>
<slot.port|all>
config macfilter deldest
This command removes a port from the destination filter set for the MAC filter with the given
<macaddr> and VLAN of <vlan>. The <macaddr> parameter must be specified as a 6-byte
hexadecimal number in the format of b1:b2:b3:b4:b5:b6.
The <vlan> parameter must identify a valid VLAN.
The <slot.port> parameter identifies the destination port to be removed from the destination port
filter set for the MAC filter.
If all is selected, all ports will be removed from the destination port filter set.
Format
config macfilter deldest
<macaddr> <vlan>
<slot.port|all>
Spanning Tree Commands
This section provides detailed explanation of the spanning tree commands. The commands are
divided into two functional groups:
•
Show commands display spanning tree settings, statistics, and other information.
•
Config commands configure features and options of the switch. For every config command
there is a show command that displays the config setting.
This section is organized by configuration type:
•
System information and statistics commands
•
Bridge and CIST commands
•
MSTI commands
•
Modified commands
•
Obsolete commands
Summary of Contents for ProSafe GSM7324
Page 4: ...May 30 2003 Beta Draft iv...