7000 Series L3 Managed Switch Reference Manual for Software v1.0
Quick Startup
6-13
May 30, 2003 Beta Draft
SOLUTION 1
All traffic entering the ports is tagged traffic. Since the traffic is tagged, the PVID configuration
for each port is not a concern.
•
The network card configuration for devices on Project A must be set to tag all traffic with
'VLAN 2'
•
The network card configuration for devices on Project B must be set to tag all traffic with
'VLAN 3'
•
The network card configuration for devices on Project C must be set to tag all traffic with
'VLAN 4'
•
The network card configuration for devices on Project P must be set to tag all traffic with
'VLAN 9'
SOLUTION 2
The network card configuration for devices on Project A, B and C should be set to NOT tag traffic.
To take care of these untagged frames configure the following:
•
config vlan ports pvid 2 0.1
•
config vlan ports pvid 2 0.2
•
config vlan ports pvid 3 0.3
•
config vlan ports pvid 3 0.4
•
config vlan ports pvid 4 0.5
•
config vlan ports pvid 4 0.6
Summary of Contents for ProSafe GSM7324
Page 4: ...May 30 2003 Beta Draft iv...