7000 Series L3 Managed Switch Reference Manual for Software v1.0
Switching Commands
7-63
May 30, 2003 Beta Draft
show loginsession
This command displays current telnet and serial port connections to the switch.
Format
show loginsession
ID
Login Session ID
User Name
The name the user will use to login using the serial port or Telnet.
A new user may be added to the switch by entering a name in a
blank entry. The user name may be up to 8 characters, and is not
case sensitive. Two users are included as the factory default,
admin and guest.
Connection From
IP address of the telnet client machine or EIA-232 for the serial
port connection.
Idle Time
Time this session has been idle.
Session Time
Total time this session has been connected.
config loginsession close
This command closes a telnet session.
Format
config loginsession close
<sessionID/all>
System Utilities
This section describes system utilities.
save config
This command permanently saves configuration changes to Non-Volatile Random Access
Memory (NVRAM).
Format
save config
logout
This command closes the current telnet connection or resets the current serial connection.
Note:
Save configuration changes before logging out. See “save config” .
Summary of Contents for ProSafe GSM7324
Page 4: ...May 30 2003 Beta Draft iv...