NETGEAR ProSafe GSM7324, Reference Manual, Page: 111 / 263

7000 Series L3 Managed Switch Reference Manual for Software v1.0
Switching Commands 7-53
May 30, 2003 Beta Draft
Format
config spanningtree bridge maxage <6-40>
config spanningtree bridge hellotime
This command sets the Hello Time parameter to a new value for the common and internal
spanning tree. The hellotime <value> is in whole seconds within a range of 1 to 10 with the value
being less than or equal to "(Bridge Max Age / 2) - 1".
Default
2
Format
config spanningtree bridge hellotime <1-10>
config spanningtree bridge forwarddelay
This command sets the Bridge Forward Delay parameter to a new value for the common and
internal spanning tree. The forwarddelay <value> is in whole seconds within a range of 4 to 30,
with the value being greater than or equal to "(Bridge Max Age / 2) + 1".
Default
15
Format
config spanningtree bridge forwarddelay <4-
30>
config spanningtree bridge priority
This command sets the Bridge Priority parameter to a new value for the common and internal
spanning tree. The bridge priority <value> is a number within a range of 0 to 61440. The twelve
least significant bits will be masked according to the 802.1s specification. This will cause the
priority to be rounded down to the next lower valid priority.
Default
32768
Format
config spanningtree bridge priority <0-
61440>
show spanningtree cst detailed
This command displays spanning tree settings for the common and internal spanning tree.
Format
show spanningtree cst detailed
Bridge Priority
Configured value.
Bridge Identifier
Time Since Topology Change
in seconds