7000 Series L3 Managed Switch Reference Manual for Software v1.0
Switching Commands
7-17
May 30, 2003 Beta Draft
Character Size
The number of bits in a character. The number of bits is always 8.
Flow Control
Whether Hardware Flow-Control is enabled or disabled. Hard-
ware Flow Control is always disabled.
Stop Bits The number of Stop bits per character. The number of Stop bits is always 1.
Parity Type
The Parity Method used on the Serial Port. The Parity Method is
always None.
config serial baudrate
This command specifies the communication rate of the terminal interface. The supported rates are
1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200.
Default
9600
Format
config serial baudrate
<speed>
config serial timeout
This command specifies the maximum connect time (in minutes) without console activity. A value
of 0 indicates that a console can be connected indefinitely. The time range is 0 to 160.
Default
5
Format
config serial timeout <
0 - 160
>
config snmpcommunity accessmode
This command restricts access to switch information. The access mode can be read-only (also
called public) or read/write (also called private).
Format
config snmpcommunity accessmode
<ro|rw>
<name>
config snmpcommunity create
This command adds (and names) a new SNMP community. A community name is a name
associated with the switch and with a set of SNMP managers that manage it with a specified
privileged level. The length of name can be up to 16 case-sensitive characters.
Summary of Contents for ProSafe GSM7324
Page 4: ...May 30 2003 Beta Draft iv...