7000 Series L3 Managed Switch Reference Manual for Software v1.0
Switching Commands
7-55
May 30, 2003 Beta Draft
show spanningtree cst port detailed
This command displays the settings and parameters for a specific switch port within the common
and internal spanning tree. The <slot.port> is the desired switch port
Format
show spanningtree cst port detailed
<slot.port>
Port Identifier
The port identifier for this port within the CST.
Port Priority
The priority of the port within the CST.
Port Forwarding State
The forwarding state of the port within the CST.
Port Role
The role of the specified interface within the CST.
Port Path Cost
The configured path cost for the specified interface.
Designated Root
Identifier of the designated root for this port within the CST.
Designated Port Cost
Path Cost offered to the LAN by the Designated Port.
Designated Bridge
The bridge containing the designated port
Designated Port Identifier
Port on the Designated Bridge that offers the lowest cost to the
LAN
Topology Change Acknowledgement
Value of flag in next Configuration Bridge Protocol
Data Unit (BPDU) transmission indicating if a topology change is
in progress for this port.
Hello Time
The hello time in use for this port.
Edge Port
The configured value indicating if this port is an edge port.
Edge Port Status
The derived value of the edge port status. True if operating as an
edge port; false otherwise.
Point To Point MAC Status
Derived value indicating if this port is part of a point to point link.
CST Regional Root
The regional root identifier in use for this port.
CST Port Cost
The configured path cost for this port.
config spanningtree cst port pathcost
This command sets the Path Cost to a new value for the specified port in the common and internal
spanning tree. The <slot.port> is the desired switch port. The pathcost <value> can be specified as
a number in the range of 1 to 200000000 or auto. If "auto" is specified, the pathcost value will be
set based on Link Speed.
Default
auto
Format
config spanningtree cst port pathcost
<slot.port> <1-200000000/auto>
Summary of Contents for ProSafe GSM7324
Page 4: ...May 30 2003 Beta Draft iv...