7000 Series L3 Managed Switch Reference Manual for Software v1.0
Command Line Interface Syntax
5-3
May 30, 2003 Beta Draft
The <slot.port> field is composed of a valid slot number and a
valid port number separated by a period (.).
logical slot.port
This parameter denotes a logical slot number and logical port
number assigned. This is applicable in the case of a LAG. The
operator can use the logical slot number and the logical port num-
ber to configure the LAG.
Conventions
Network address are used to define a link to a remote host, workstation or network. Network
addresses are shown using the following syntax:
Double quotation marks such as "System Name with Spaces" set off user defined strings. If the
operator wishes to use spaces as part of a name parameter then it must be enclosed in double
quotation marks.
Entering '@' in front of any command will allow the user to reference any root command from
anywhere in the tree. For example, '>config router>@show arp table' will display the ARP table
even though the command was not executed from the root level.
Command completion finishes spelling the command when enough letters of a command are typed
to uniquely identify the command word. The command may be executed by typing <enter>
(command abbreviation) or the command word may be completed by typing the <tab> or <space
bar> (command completion).
The value 'Err' designates that the requested value was not internally accessible. This should never
happen and indicates that there is a case in the software that is not handled correctly.
The value of '-----' designates that the value is unknown.
Table 1.
Network Address Syntax
Address Type
Format
Range
ipAddr
A.B.C.D
0.0.0.0 to 255.255.255.255
(decimal)
macAddr
YY:YY:YY:YY:YY:YY
hexidecimal digit pairs
Summary of Contents for ProSafe GSM7324
Page 4: ...May 30 2003 Beta Draft iv...