7000 Series L3 Managed Switch Reference Manual for Software v1.0
Routing Commands
8-37
May 30, 2003 Beta Draft
config router bootpdhcprelay maxhopcount
This command configures the maximum allowable relay agent hops for BootP/DHCP Relay on the
system. The <hops> parameter has a range of 1 to 16.
Default
4
Format
config bootpdhcprelay maxhopcount
<1-16>
config router bootpdhcprelay minwaittime
This command configures the minimum wait time in seconds for BootP/DHCP Relay on the
system. When the BOOTP relay agent receives a BOOTREQUEST message, it MAY use the
seconds-since-client-began-booting field of the request as a factor in deciding whether to relay the
request or not. The parameter has a range of 0 to 100 seconds.
Default
0
Format
config bootpdhcprelay minwaittime
<0-100>
config router bootpdhcprelay serverip
This command configures the server IP Address for BootP/DHCP Relay on the system. The
<ipaddr> parameter is an IP address in a 4-digit dotted decimal format.
Default
0.0.0.0
Format
config bootpdhcprelay serverip
<ipaddr>
Summary of Contents for ProSafe GSM7324
Page 4: ...May 30 2003 Beta Draft iv...