7000 Series L3 Managed Switch Reference Manual for Software v1.0
10-2
ACL Commands
May 30, 2003 Beta Draft
Source IP Mask
This field displays the source IP Mask for this rule.
Source Ports
This field displays the source port range for this rule.
Destination IP Address
This displays the destination IP address for this rule.
Destination IP Mask
This field displays the destination IP Mask for this rule.
Destination Ports
This field displays the destination port range for this rule.
Service Type Field Match
This field indicates whether an IP DSCP, IP Precedence, or IP
TOS match condition is specified for this rule.
Service Type Field Value
This field indicates the value specified for the Service Type Field
Match (IP DSCP, IP Precedence, or IP TOS).
Config Commands
config acl create
This command creates an Access Control List (ACL) that is identified by the parameter
<aclid>.
The ACL number is an integer from 1 to 100.
Default
none
Format
config acl create <aclid>
config acl delete
This command deletes an ACL that is identified by the parameter
<aclid>
from the system
.
Format
config acl delete <aclid>
config acl rule create
This command creates a rule within the ACL referenced by the parameter
<aclid>.
The rule is
identified by the
<rulenum>
parameter. An ACL may have up to 10 user-specified rules, whose
<rulenum>
ranges from 1 to 10. Rules are created with a default action of deny.
Default
none
Format
config acl rule create <aclid> <rulenum>
Summary of Contents for ProSafe GSM7324
Page 4: ...May 30 2003 Beta Draft iv...