7000 Series L3 Managed Switch Reference Manual for Software v1.0
CLI Commands: Differentiated Services
9-31
May 30, 2003 Beta Draft
DiffServ Admin mode
The current value of the DiffServ administrative mode.
Class Table Size
The current number of entries (rows) in the Class Table.
Class Table Max
The maximum allowed entries (rows) for the Class Table.
Class Rule Table Size
The current number of entries (rows) in the Class Rule Table.
Class Rule Table Max
The maximum allowed entries (rows) for the Class Rule Table.
Policy Table Size
The current number of entries (rows) in the Policy Table.
Policy Table Max
The maximum allowed entries (rows) for the Policy Table.
Policy Instance Table Size
The current number of entries (rows) in the Policy Instance Table.
Policy Instance Table Max
The maximum allowed entries (rows) for the Policy Instance
Table.
Policy Attribute Table Size
The current number of entries (rows) in the Policy Attribute
Table.
Policy Attribute Table Max
The maximum allowed entries (rows) for the Policy Attribute
Table.
Service Table Size
The current number of entries (rows) in the Service Table.
Service Table Max
The maximum allowed entries (rows) for the Service Table.
show diffserv policy detailed
This command displays all configuration information for the specified policy. The <policyname>
is the name of an existing DiffServ policy.
Format
show diffserv policy detailed <policyname>
Policy Name
The name of this policy.
Type
The policy type, namely whether it is an inbound or outbound
policy definition.
The following information is repeated for each class associated with this policy (only those policy
attributes actually configured are displayed):
Class Name
The name of this class.
Mark CoS
Denotes the class of service value that is set in the 802.1p header
of outbound packets. This is not displayed if the config diffserv
policy mark cos command was not specified.
Summary of Contents for ProSafe GSM7324
Page 4: ...May 30 2003 Beta Draft iv...