NEC N8400-086F, User Manual

Page: 85 / 294

Installing the Operating System with Express Setup 5-13
NOTES:
„
You can use only the physical devices that have same model
number to configure logical drive.
„
If the process is not finished normally, the driver may not be stored
in the EXPRESSBUILDER. Refer to "Optional Board Supported
by NEC EXPRESSBUILDER" described earlier in this chapter.
„
When you use RAID Controller, if [Skip the logical drive creation]
is not selected at [Enter RAID settings] screen, refer to "RAID
Configuration (Chapter 4)" in User's Guide that comes with the
Storage and I/O Blade AD106a, or "Creating New RAID using
RAID Controller (Page 5-55 in this User's Guide)" to create RAID
beforehand.
9.
Specify the installing medium and the Windows system partition.
[Specify medium / Partition] steps are displayed. Confirm the parameters, modify if
necessary, and then click [Next].