NEC N8400-086F, User Manual

Page: 170 / 294

8-12 Troubleshooting
‰
Is the system used in the status that Windows Server 2003 and Linux are not started?
→
In the following states with the use of USB keyboard and USB floppy disk drive,
conduct key entries when the access lamp on the USB floppy disk drive is off (or
the floppy disk is not accessed).
– Press
F6
,
S
, and
Enter
in installation by using the Windows Setup Disk.
– Start of ROM-DOS Startup FD for command input
Inserted the correct CD-ROM but the message like the following is displayed:
The CD-ROM is not inserted or the wrong CD-ROM is inserted.
Please insert the correct CD-ROM.
OK
‰
Is the data side of the CD-ROM dirty or damaged?
→
Take the CD-ROM out of the optical disk drive, confirm that it is not dirty or
damaged, reset and click [OK].
Fail to access to the DVD/CD-ROM:
T
Is the DVD/CD-ROM properly set in the optical disk drive tray?
→
Take the disc out of the tray, and set the disc with its label side upward.
T
Is the DVD/CD-ROM applicable to the server?
→
The DVD/CD-ROM for Macintosh is not available for use.
→
For the disk which does not conform to the CD standard, the playback of such a
disk with the DVD drive is not guaranteed.